Planar Computer Monitor PQ191M User Manual

PLANAR LCD MONITOR PQ191MMANUAL  
 
Important Precautions  
This unit has been engineered and manufactured to ensure your personal  
safety, however improper use may result in electrical shock or fire hazards.  
In order to allow the proper operation of all safeguards incorporated in this  
display, observe the following basic rules for its installation, use, and  
servicing.  
On Safety  
Use only the power cord supplied with the unit. In case you use another power  
cord, make sure that it is certified by the applicable national standards if not being  
provided by the supplier. If the power cable is faulty in any way, please contact the  
manufacturer or the nearest authorized repair service provider for a replacement.  
The power supply cord is used as the main disconnection device. Ensure that the  
socket-outlet is easily accessible after installation.  
Operate the display only from a power source indicated in the specifications of  
this manual or listed on the display. If you are not sure what type of power supply  
you have in your home, consult with your dealer.  
Overloaded AC outlets and extension cords are dangerous. So are frayed power  
cords and broken plugs. They may result in a shock or fire hazard. Call your service  
technician for replacement.  
Do not Open the Display.  
There are no user serviceable components inside.  
There are Dangerous High Voltages inside, even when the power is OFF.  
In case of difficulty, refer first to the Troubleshooting section of this manual.  
To Avoid Personal Injury :  
Do not place the display on a sloping shelf unless properly secured.  
Use only a stand recommended by the manufacturer.  
To Prevent Fire or Hazards:  
Always turn the display OFF if you leave the room for more than a short period  
of time. Never leave the display ON when leaving the house.  
Keep children from dropping or pushing objects into the display's cabinet  
openings. Some internal parts carry hazardous voltages.  
Do not add accessories that have not been designed for this display.  
During a lightning storm or when the display is to be left unattended for an  
extended period of time, unplug it from the wall outlet.  
A1  
 
Important Precautions  
On Installation  
Do not allow anything to rest upon or roll over the power cord, and do not place  
the display where the power cord is subject to damage.  
Do not use this display near water such as near a bathtub, washbowl, kitchen  
sink, laundry tub, in a wet basement, or near a swimming pool.  
Displays are provided with ventilation openings in the cabinet to allow the release  
of heat generated during operation. If these openings are blocked, built-up heat  
can cause failures which may result in a fire hazard. Therefore, NEVER:  
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.  
Place the display in a built-in enclosure unless proper ventilation is provided.  
Cover the openings with cloth or other material.  
Place the display near or over a radiator or heat source.  
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,  
mar, or damage the Active Matrix LCD permanently.  
Do not press the LCD screen with your finger for a long time as this may cause  
some afterimages.  
Some dot defects may appear as Red, Green or Blue spots on the screen.  
However, this will have no impact or effect on the display performance.  
If possible, use the recommended resolution to obtain the best image quality for  
your LCD display. If used under any mode except the recommended resolution,  
some scaled or processed images may appear on the screen. However, this is  
characteristic of the fixed-resolution LCD panel.  
On Cleaning  
Unplug the display before cleaning the face of the display screen.  
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display  
screen because over-spraying may cause electrical shock.  
On Repacking  
Do not throw away the carton and packing materials. They make an ideal  
container in which to transport the unit. When shipping the unit to another  
location, repack it in its original material.  
A2  
 
Connecting the Display  
Using the Computer  
1.  
Connect the signal cable. When attached, tighten the thumbscrews to secure  
2. the connection.  
Connect the power cord into a proper power outlet that is easily accessible and  
close to the display.  
NOTE  
This is a simplified representation of the rear view.  
This rear view represents a general model; your display  
may differ from the view as shown.  
Signal Cable  
Power Cord  
Analog signal  
D-sub  
Digital signal  
- DVI  
*
*
*
Varies according to model.  
Wall-outlet type*  
PC-outlet type*  
PC  
MAC  
Mac adapter  
For Apple Macintosh use, a separate plug adapter is needed to  
change the 15 pin high density (3 row) D-sub VGA connector  
on the supplied cable to a 15 pin 2 row connector.  
A3  
 
Control Panel Functions  
Front Panel Controls  
LightView  
Control  
Function  
Power Button  
Use this button to turn the display on or off.  
Power (DPMS)  
Indicator  
This Indicator lights up green when the display  
operates normally. If the display is in DPM (Energy  
Saving) mode, this indicator color changes to amber.  
Use this button to enter or exit the On Screen  
Display.  
MENU Button  
Buttons  
Use these buttons to choose or adjust items in  
the On Screen Display.  
Use this button to enter a selection in the On Screen  
Display.  
AUTO/SELECT  
Button  
A4  
 
Control Panel Functions  
Control  
Direct Access Function  
This function optimizes the brightness, contrast or color value to  
the surrounding conditions and settings and enables you to  
enjoy the most suitable picture by adjusting the surroundings  
(DAY/NIGHT/USER MODE).  
TEXT: For viewing letters  
MOVIE: For viewing movies  
PHOTO: For viewing pictures or the photographs  
USER MODE: This function memorizes the manual  
adjustment -Brightness, Contrast and Color value on the  
On Screen Display.  
100  
100  
Bring up Contrast and Brightness adjustment.  
:
AUTO adjustment function  
When adjusting your display settings, always press the  
AUTO/SELECT button before entering the On Screen  
Display(OSD). This will automatically adjust your display image  
to the ideal settings for the current screen resolution size  
(display mode).  
The best display mode is 1280x1024.  
SOURCE  
Use this button to make Dsub or DVI connector active. This  
feature is used when two computers are connected to the  
display. The default setting is Dsub.  
CONTROLS LOCKED/UNLOCKED  
:
MENU and  
This function allows you to secure the current control settings,  
so that they cannot be inadvertently changed. Press and hold  
the MENU button and  
button for 3 seconds: the message  
“CONTROLS LOCKED” appears.  
You can unlock the OSD controls at any time by pushing the  
MENU button and  
button for 3 seconds:  
the message “CONTROLS UNLOCKED” will appear.  
A5  
 
On Screen Display (OSD) Control Adjustment  
Screen Adjustment  
Making adjustments to the image size, position and operating parameters of  
the display is quick and easy with the On Screen Display Control system. A  
short example is given below to familiarize you with the use of the controls.  
The following section is an outline of the available adjustments and selections  
you can make using the OSD.  
NOTE  
Allow the display to stabilize for at least 30 minutes before making image adjustments.  
To make adjustments in the On Screen Display, follow these steps:  
Press the MENU Button, then the main menu of the OSD appears.  
To access a control, use the  
or  
Buttons. When the icon you want  
becomes highlighted, press the AUTO/ SELECT Button.  
Use the  
Buttons to adjust the item to the desired level.  
Accept the changes by pressing the AUTO/SELECT Button.  
Exit the OSD by Pressing the MENU Button.  
A6  
 
On Screen Display(OSD) Selection and Adjustment  
The following table indicates all the On Screen Display control, adjustment,  
and setting menus.  
Main menu  
Sub menu  
A
D
Reference  
BRIGHTNESS  
CONTRAST  
To adjust the brightness and  
contrast of the screen  
BRIGHTNESS  
CONTRAST  
PRESET  
9300K  
6500K  
COLOR  
To customize the color of the  
screen  
R/G/B(User Color)  
GAMMA  
V POSITION  
H POSITION  
CLOCK  
POSITION  
TRACKING  
SETUP  
To adjust the position of the  
screen  
To improve the clarity and  
stability of the screen  
PHASE  
LANGUAGE  
OSD POSITION  
SIGNAL  
To customize the screen status  
for a user's operating environment  
FACTORY RESET  
: Adjustable  
A : Analog Input  
D : Digital Input  
NOTE  
The order of icons may differ depending on the model (A7~A9).  
A7  
 
On Screen Display(OSD) Selection and Adjustment  
You were introduced to the procedure of selecting and adjusting an item  
using the OSD system. Listed below are the icons, icon names, and icon  
descriptions of the all items shown on the Menu.  
NOTE  
OSD (On Screen Display) menu languages on the monitor may differ from the manual.  
To adjust the brightness and contrast of the screen  
OSD Adjust  
Description  
BRIGHTNESS  
To adjust the brightness of the screen.  
CONTRAST  
To adjust the contrast of the screen.  
To customize the color of the screen  
OSD Adjust  
Description  
PRESET 9300K/6500K  
Select the screen color.  
9300K: Slightly bluish white.  
6500K: Slightly reddish white.  
RED  
GREEN  
BLUE  
Set your own color levels.  
Set your own gamma value. (-50~50)  
On the monitor, high gamma values  
display whitish images and low gamma  
values display high contrast images.  
GAMMA  
To adjust the position of the screen  
OSD Adjust  
Description  
Vertical Position  
To move image up and down.  
Horizontal Position  
To move image left and right.  
A8  
 
On Screen Display(OSD) Selection and Adjustment  
To improve the clarity and stability of the screen  
OSD Adjust  
Description  
To minimize any vertical bars or  
stripes visible on the screen  
background.The horizontal screen  
size will also change.  
CLOCK  
PHASE  
To adjust the focus of the display.  
This item allows you to remove any  
horizontal noise and clear or sharpen  
the image of characters.  
To customize the screen status for a user's operating environment  
OSD Adjust  
Description  
To choose the language in which the  
control names are displayed.  
LANGUAGE  
OSD POSITION  
SIGNAL  
To adjust position of the OSD window  
on the screen.  
To select DSUB ANALOG, DVI  
DIGITAL or DVI ANALOG / as the  
active input. This feature is used when  
two computers are connected to the  
display. The display automatically  
detects the proper input when only one  
video source is connected.  
Return to all factory default settings  
except "LANGUAGE".  
If you dont want to reset the monitor,  
FACTORY  
RESET  
use the  
button to select NO and  
then press the AUTO/SELECT button.  
A9  
 
Troubleshooting  
Check the following before calling for service.  
No image appears  
Is the power cord of the  
display connected?  
Check and see if the power cord is connected  
properly to the power outlet.  
Is the power indicator  
light on?  
Press the Power button.  
Is the power on and the  
power indicator green?  
Adjust the brightness and the contrast.  
Is the power indicator  
amber?  
If the display is in power saving mode, try moving  
the mouse or pressing any key on the keyboard  
to bring up the screen.  
Make sure if the power is on.  
Try to turn on the PC.  
Do you see an "INPUT  
SIGNAL OUT OF  
RANGE" message on  
the screen?  
This message appears when the signal from the  
PC (video card) is out of horizontal or vertical  
frequency range of the display. Typically this  
issue can by resolved by restarting the PC with  
the display connected.  
Do you see a "NO  
SIGNAL "message on  
the screen?  
This message appears when the signal cable  
between your PC and your display is not  
connected. Check the signal cable and try again.  
Do you see a "CONTROLS LOCKED" message on the screen?  
Do you see  
You can secure the current control settings,  
so that they cannot be inadvertently  
changed. You can unlock the OSD controls  
at any time by pushing the MENU button  
“CONTROLS LOCKED”  
when you push MENU  
button?  
and  
button for 3 seconds: the message  
“CONTROLS UNLOCKED” will appear.  
A10  
 
Troubleshooting  
Display image is incorrect  
Display Position is  
incorrect.  
Press the AUTO/SELECT button to  
automatically adjust your display image to the  
ideal setting.  
If the results are unsatisfactory, adjust the image  
position using the H position and V position  
icon in the on screen display.  
Check Control Panel --> Display --> Settings  
and see if the frequency or the resolution were  
changed. If yes, readjust the video card to the  
recommend resolution.  
On the screen  
background, vertical  
bars or stripes are  
visible.  
Press the AUTO/SELECT button to  
automatically adjust your display image to the  
ideal setting.  
If the results are unsatisfactory, decrease the  
vertical bars or stripes using the CLOCK icon in  
the on screen display.  
Any horizontal noise  
appearing in any  
image or characters  
are not clearly  
Press the AUTO/SELECT button to  
automatically adjust your display image to the  
ideal setting.  
If the results are unsatisfactory, decrease the  
horizontal bars using the PHASE icon in the on  
screen display.  
portrayed.  
Check Control Panel --> Display --> Settings  
and adjust the display to the recommended  
resolution or adjust the display image to the ideal  
setting. Set the color setting higher than 24 bits  
(true color).  
The screen color is  
mono or abnormal.  
Check if the signal cable is properly connected  
and use a screwdriver to fasten if necessary.  
Make sure the video card is properly inserted in  
the slot.  
Set the color setting higher than 24 bits (true  
color) at Control Panel - Settings.  
The screen blinks.  
Check if the screen is set to interlace mode and if  
yes, change it to the recommend resolution.  
Make sure the power voltage is high enough, It  
has to be higher than AC100-240V 50/60Hz.  
A11  
 
Specifications  
Flat Panel Active matrix-TFT LCD  
Display  
19 inch diag viewable, Anti-Glare coating, 0.29 mm pixel pitch  
Horizontal Viewing Angle: -85 to +85 deg typical  
Vertical Viewing Angle: -85 to 85 deg typical  
Horizontal Freq. Analog:30 - 83kHz (Automatic)  
Sync Input  
Digital:30 - 71kHz (Automatic)  
Vertical Freq.  
Input Form  
56 - 75Hz (Automatic)  
Separate TTL, Positive/Negative  
Composite TTL Positive/Negative  
SOG (Sync On Green)  
Digital  
Signal Input  
15 pin D-Sub Connector  
DVI - I connector (Digital/Analog)  
RGB Analog (0.7Vp-p/75ohm), Digital  
Video Input  
Input Form  
Max  
DVI Digital/Analog:VESA 1280 x 1024@60Hz  
D-sub Analog:VESA 1280 x 1024@75Hz  
VESA 1280 x 1024@60Hz  
Resolution  
Plug&Play  
Recommend  
DDC 2B  
43W  
3W  
3W  
Power  
Consumption  
Normal  
:
Stand-by/Suspend  
DPMS Off  
Width  
Height  
Depth  
Net  
41.28 cm / 16.25 inches  
43.50 cm / 17.13 inches  
22.30 cm / 8.78 inches  
7.20 kg (15.87lbs)  
Dimensions  
&Weight  
(with tilt/ swivel  
stand)  
Tilt  
Swivel  
-5˚~30˚  
360˚  
Tilt/Swivel Range  
Power Input  
AC 100-240V~ 50/60Hz 1.0A  
Operating Conditions  
Environmental  
Conditions  
Temperature 10˚C to 35 ˚C  
Humidity  
10 % to 80 % non-Condensing  
Storage Conditions  
Temperature -20˚C to 60 ˚C  
Humidity  
300 cd/m2 typical  
700:1 typical  
5 % to 95 % non-Condensing  
Brightness  
Contrast  
Power cord  
Regulations  
Wall-outlet type  
UL, cUL, FCC  
NOTE  
Information in this document is subject to change without notice.  
A12  
 
Specifications  
Preset Modes (Resolution)  
Display Modes (Resolution)  
Horizontal Freq. (kHz)  
Vertical Freq. (Hz)  
1
2
3
4
5
6
7
8
9
10  
11  
12  
13  
31.469  
31.468  
31.469  
37.500  
37.879  
46.875  
49.725  
48.363  
60.123  
68.681  
61.805  
63.981  
79.976  
VGA  
VGA  
VGA  
640 x 350  
720 x 400  
640 x 480  
640 x 480  
800 x 600  
800 x 600  
832 x 624  
1024 x 768  
1024 x 768  
1152 x 870  
1152 x 900  
1280 x 1024  
1280 x 1024  
70  
70  
60  
75  
60  
75  
75  
60  
75  
75  
65  
60  
75  
VESA  
VESA  
VESA  
MAC  
VESA  
VESA  
MAC  
VESA  
VESA  
VESA  
VESA wall mounting  
Connected to another object (stand  
type and wall-mounted type. This  
monitor accepts a VESA-compliant  
mounting interface pad.)  
Kensington Security Slot- optional  
Connected to a locking  
cable that can be purchased  
separately at most computer  
stores  
A13  
 
Specifications  
Signal Connector Pin Assignment  
C2  
C1  
C5  
8
16  
24  
1
9
17  
C4  
C3  
DVI-I Connector  
Pin  
1
2
3
4
5
6
7
8
Signal(DVI-I)  
T. M. D. S. Data2-  
T. M. D. S. Data2+  
T. M. D. S. Data2/4 Shield  
T. M. D. S. Data4-  
T. M. D. S. Data4+  
DDC Clock  
Pin  
16  
Signal(DVI-I)  
Hot Plug Detect  
T. M. D. S. Data0-  
T. M. D. S. Data0+  
T. M. D. S. Data0/5 Shield  
T. M. D. S. Data5-  
T. M. D. S. Data5+  
T. M. D. S. Clock Shield  
T. M. D. S. Clock+  
T. M. D. S. Clock-  
Analog Red  
17  
18  
19  
20  
21  
22  
23  
24  
C1  
C2  
C3  
C4  
C5  
DDC Data  
Analog Vertical Sync.  
T. M. D. S. Data1-  
T. M. D. S. Data1+  
T. M. D. S. Data1/3 Shield  
T. M. D. S. Data3-  
T. M. D. S. Data3+  
+5V Power  
9
10  
11  
12  
13  
14  
15  
Analog Green  
Analog Blue  
Analog H. Sync.  
Analog Ground  
Ground (return for +5V,  
H. Sync. and V. Sync.)  
T. M. D. S. (Transition Minimized Differential Signaling)  
A14  
 
Making use of USB (Universal Serial Bus) - Optional  
USB (Universal Serial Bus) is an innovation in connecting your different  
desktop peripherals conveniently to your computer. By using the USB, you will  
be able to connect your mouse, keyboard, and other peripherals to your display  
instead of having to connect them to your computer. This will give you greater  
flexibility in setting up your system. USB allows you to connect a chain of up to  
120 devices on a single USB port; and you can “hot” plug (attach them while  
the computer is running) or unplug them while maintaining the Plug and the  
Plug auto detection and configuration. This display has an integrated BUS-  
powered USB hub, allowing up to 2 other USB devices to be attached it.  
USB connection  
1. Connect the upstream port of the display to the downstream port of the USB  
compliant PC or another hub using the USB cable. (Computer must have a  
USB port)  
2. Connect the USB compliant peripherals to the downstream ports of the  
display.  
This is a simplified representation  
of rear view.  
USB upstream Port  
To USB downstream port of  
the USB compliant PC or  
another hub cable  
USB downstream Port  
connect the cables from USB  
compliant peripherals-such as  
keyboard, mouse, etc  
NOTE  
To activate the USB hub function, the display must be connected to a USB compliant PC(OS)  
or another hub with the USB cable(enclosed).  
When connecting the USB cable, check that the shape of the connector at the cable side  
matches the shape at the connecting side.  
Even if the display is in a power saving mode, USB compliant devices will function when they  
are connected the USB ports(both the upstream and downstream) of the display.  
A15  
 
Making use of USB (Universal Serial Bus) - Optional  
USB Specifications  
Rev. 1.1 complied BUS-powered hub  
100mA for each (MAX)  
USB standard  
Downstream power supply  
Communication speed  
USB port  
12 Mbps (full), 1.5 Mbps (low)  
1 Upstream port  
2 Downstream ports  
IMPORTANT: These USB connectors are not designed for use with high-power USB devices  
such as a video camera, scanner, etc. Recommend connecting high-power USB devices  
directly to the computer  
A16  
 
PLANAR SYSTEMS, INC.  
Customer Service  
phone: 1-866-PLANAR-1 (1-866-752-6271)  
hours: M-F, 8am - 9pm EST  
© 2003 Planar Systems, Inc. Planar is a registered trademark of Planar Systems, Inc. Other brands and names are the property of their respective owners.  
Technical Information in this document is subject to change without notice. 06/03  
 

Paxar Printer TC6037EM User Manual
Pelco Security Camera C1463SM User Manual
Pelco Video Gaming Accessories WCS1 4 User Manual
Pentax Camera Flash 200FG User Manual
Philips DVD Player DVD420AT User Manual
Philips Work Light T25 E14 User Manual
Polk Audio Home Theater System HT BD2E User Manual
Poulan Chainsaw 530163243 User Manual
Presto Gas Grill 07046 User Manual
Primera Technology Printer ADL MAX User Manual